We got a hold of a great little golden iPollo V1 Mini Ethash/ETChash ASIC miner and chose to experiment with it to see why numerous individuals like these little home-oriented high-hashrate and low-power ASIC miners with assistance for the Ethash and ETChash algorithms. You may be able to score a good offer on used iPollo V1 Mini now that these devices are not that successful like they were throughout the time when you could mine Ethereum (ETH) with them and they can still can be found in useful in the next bull run or meanwhile if you mine some Ethash or ETChash coins meanwhile. The best thing is that they are very compact, not that loud in general and really power effective compared to what a GPU mining rig would utilize to give you the exact same hashpower. And they do include WiFi adapter built-in, so as soon as you set them up they are simple to move your house or apartment as you would just need to plug them in a power socket in order for them to start hashing, no requirement to use network cable televisions, although you can still if you desire to.
The Nano Labs V66H ASIC single chip is obviously capable of 300 MH/s Ethash/ETChash hashrate with a power use of around 200-ish Watts of power usage, no exact specifications of the chips. If you simply increase the chip count, these are simple to scale with huge hashrate miners. Though obviously effectiveness could be even more improved judging by the specifications of the Mini SE and Mini SE Plus miners that offer even better power performance. Nano Labss iPollo Ethash/ETChash ASIC chips may not be the most power efficient in the bunch, however they do seem to perform quite competitively and the 6GB of memory is a plus. Not to point out that these miners do include assistance for dual-mining with ZIL, so a little extra earnings included by that also, an earnings that may enable the devices to successfully take on higher hashrate items with lower power usage such as Jasminer X4.
The iPollo V1 Mini ASIC miner comes with a simple and basic to utilize web-based user interface for tracking and control of the device, there is also the iPolloTool software application for Windows that enables for easier setting up and monitoring of several miners at when. The average reported hashrate we are seeing for the iPollo V1 Mini is around 300 MH/s with an operating temperature at around 50 degrees and fans at around 4800 rpm.
Publihsed in: Mining Hardware|Tests and Reviews
Related tags: Etchash ASIC miner, Etchash miner, Ethash ASIC miner, Ethash miner, iPollo, iPollo ASIC, iPollo ASIC miner, iPollo V1 Mini, iPollo V1 Mini ASIC miner, iPollo V1 Mini ETChash miner, iPollo V1 Mini Ethash miner, iPollo V1 Mini miner, Nano Labs, Nano Labs ASIC, Nano Labs ASIC miner, Nano Labs iPollo
The iPollo V1 Mini ASIC miner is rather compact and comes with an external 12V power supply with an optimum rating of 360W (2 lines ranked at 180W each) with 2 6-pin PCI-E power adapters coming out of this passive Huntkey PSU. You require to plug in the two 12V power lines into the miner that has a power use of 240W and that ought to be great for the wires and the miner.
The power supply is rather excellent, although it fumes when mining it is very effective and provides stable power to the miner. The power usage we have actually measured with the stock power supply is around 50W for the miner while preparing to mine and around 244W at the wall when mining starts. Linking a 1000W Platinum rated Corsair power supply led to 249W of power usage while mining (4-5W more due to the extra 5V line power usage the Corsair has).
The miner supports both ETChash and Ethash mining and dual-mining with ZIL as well. There is however a catch with the dual mining assistance, the current dual-mining firmware is not yet readily available on the official firmware upgrade package yet, however you can download firmware variation 0.76.96 from RabidMining. There does not appear to be support for Nicehash mining on the iPollo out of the box, although NiceHash simply posted how to make it possible for assistance for mining with iPollo. The 6GB memory onboard permits for a decent future-proof ability of the gadget (take care with the 4GB designs!). It takes about 4 minutes for the miner to prepare to mine ETC as soon as you boot it up, so rather quick on that front compared to Jasminer X4 where you will need to wait about 20 minutes.
There is a user fan control alternative offered with both automatic and manual modes readily available for the user to set up. And there is likewise a Wireless network setup in the web-interface that you need to use to connect your gadget to a WiFi network. The very first time you run it needs to be linked with a network cable television so that you can setup the Wifi, after that it will just connect to the wireless network you set it approximately use automatically. There is unfortunately no control for operating frequency or voltage offered, so no user choices available for attempting to optimize the gadget for much better power efficiency or faster hashrate for instance. The offered logs in the web user interface are not really functional as although there are 3 various logs readily available for you to keep an eye on through the web interface neither one of them is the cgminer output for the actual mining procedure (the device uses a modified cgminer as mining software application).
All in all, the iPollo V1 Mini Ethash/ETChash ASIC miner is a nice compact house miner for anyone interested, it works well, quite flexible and performs as expected … there is of course more performance to be wanted, so space for additional improvement. If you are seeking to get among these look for some sub $1000 USD deals.
— For more about the iPollo V1 Series of Ethash/ETChash ASIC miners …
Due to the compact size of the miner the manufacturer Nano Labs has decided that they might utilize 2 small 60mm size fans with high-rpm to supply the cooling for the miner. With the maximum speed of the 2 cooling fans you are going to be getting around 64 dBA noise level while with them running usually with the miner operating at around 50 degrees Celsius and the fans at around 4800 rpm the sound level determined is around 52 dBA and that is much more appropriate, though still not extremely silent.
Now, let us start with a little information as iPollo does provide two sets of V1 ASIC miners, one is described as ETC Miners and have the word Classic in their product names. These are iPollo V1 Mini Classic (130 MH/s at 104W) and iPollo V1 Mini Classic Plus (280 MH/s at 270W) with both devices having a design memory of 3.75 GB out of which the available memory for usage is 3.6 GB.
The cooler of the miner is a large aluminium copper block that seems like a server type heatsink, however does not appear to be a standard sized one … the installing hole distance, the extending copper block and not centred placement of the screws make it appear like a customized design. BTW after disassembling the miner with changed thermal substance utilizing Arctic MX4 thermal grease weve seen about 1 degree Celsius drop in the operating temperature of the miner.
The other ETH Miner classification is comparable in terms of hashrate and power use or more effective, however these gadgets do come with more memory readily available. There is also the iPollo V1 (3600 MH/s at 3100W), but simply like the comparable Classic counterpart this one is big, rather expensive and noisy for the regular house miners anyway.
Check Some More Similar Crypto Related Publications:
We got a hold of a good little golden iPollo V1 Mini Ethash/ETChash ASIC miner and decided to play around with it to see why so numerous people like these small home-oriented high-hashrate and low-power ASIC miners with support for the Ethash and ETChash algorithms. You require to plug in the two 12V power lines into the miner that has a power use of 240W and that ought to be great for the wires and the miner. Due to the compact size of the miner the producer Nano Labs has decided that they might use two small 60mm size fans with high-rpm to supply the cooling for the miner. BTW after disassembling the miner with replaced thermal compound using Arctic MX4 thermal grease weve seen about 1 degree Celsius drop in the operating temperature of the miner.
The iPollo V1 Mini ASIC miner comes with a simple and basic to use web-based interface for tracking and control of the device, there is also the iPolloTool software application for Windows that enables for easier setting up and monitoring of several miners at as soon as.
